![]() Once the blade depth has been set, the blade holder can be loaded back into the machine and is ready for cutting. The blade depth can easily be increased or decreased by spinning the top knob clockwise or counterclockwise. 2mm is essentially the thickness of two credit cards being pressed together. Even more reliable, versatile, fast and robust, it allows operators to create the most varied products with the utmost accuracy. The GS-24 is the latest Roland vinyl cutter of the Camm-1 family. Once the blade has been removed, you can easily insert the new blade.Īfter the new blade has been installed, it is important to make sure the blade depth (the amount of blade exposed from the blade holder) is set to 2 millimeters. The Roland GS-24 is a professional desktop Vinyl Cutter. This will push the blade down, allowing you to remove it safely. Push down on the end where there is a small round piece of metal sticking out. The blade is held inside the blade holder by a magnet. To change out a blade, simply unscrew the front knob of the blade holder and remove it from the cutter. You might also want to use a blade with a different angle depending on the material you are cutting. ![]() When using the Roland GS-24 vinyl cutter, you will need to change out blades from time to time, as they dull with repeated use. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |